Electric RC Plane Terminology for the Beginner

Most of us are familiar with the two combinations of the letter R and C and what this means. When used together, they stand for the phrase "radio control." A growing number of aspiring and wannabe aviators have chosen to spend a significant portion of their leisure time with the controls of an electric RC plane.

The fun enjoyed by flying model airplanes increases, if and when the hobbyist takes time to learn some basic rules. Those who have just started to comply with flying RC usually operate control with three different channels. The smart hobbyist learns the technical name for the thing that each channel controls.

Each RC plane with a motor and a rudder. Two of the three device control channels will allow for remote motor and helm operation. The third channel controls the elevator which defines the level at which the aircraft is raised above the ground.

Although a new amusement is very serious, the growing number of flying electric RC airplanes – powered by design improvements that become easier and cheaper – serve to illuminate the general public's attraction. However, increasing RC supporters continue to play major changes, such as brushless motors, electronic speed controls (ESC), nickel-metal hydride (NiMH) and lithium polymer (LiPo)

Thanks to the introduction of the 2.4GHz spectrum spread technology, flying RCs can now enjoy free-in-flight flight. If you're just starting out, consider buying a 2.4 GHz radio system compared to a traditional narrow band. That way you will not have to worry about another pilot in your frequency and will cause you to hang out or crash.

Leave a Reply

Your email address will not be published. Required fields are marked *