Introduction to Different Types of Remote Control Airplanes

There are many types of airplanes around, and there are a ton of choices when it comes to buying something you want. First the type of plane is distinguished by two main categories, the micro RC plane and the regular RC plane. Then there are BNF, RTF, ARF, and PNP levels within each category. There are many options that this new hobbyist can confuse. However, when a hobbyist develops an understanding base on different platforms, a wise decision can be reached.

A micro remote control airplane allows a hobbyist to fly safely indoors. They are light weight, good with maneuvers and usually made of foam. They have wings that are as large as 6 inches, and have many colors and sizes. The micro RC airplane is extremely adaptable and can be easily reconfigured.

The traditional hobbyist enjoys a regular RC airplane. The idea of ​​a regular plane can mean many things. But this time it refers to the traditional RC airplane. These things run on fuel, heavier and metal in some cases. It is a direct opposition to micro airplanes that, usually the battery operated, has a lightweight titanium, or plastic frame or is mentioned before the foam. Regular remote-controlled airplanes, which may be hazardous due to the fuel used to stimulate them; but in the hands of an experienced hobbyists it is completely safe. Thus, micro-versions are the future planes that grow around the use of technology that makes them almost foolish.

However, within these small planes there are BNF airplane, representing Bind-N-Fly. These airplanes are great for intermediate flyers and can be ready to fly in no time at all, because the name. They are made by a set manufacturer, and are set to a receiver comparable to 2.4 GHz. They need some meetings.

Then there are RTF airplanes, they are known as products that are ready to fly. They are built into a kit, which usually only requires a superfluous piece needed to be added to the machine. These are complete kits and usually require only a small amount of time to get from the box and together. These are another option for beginners.

The next item, is known in the acronym ARF. ARF represents almost-ready-to-fly. As their name suggests, they need more work to improve the flight plan. They are made for the intermediate hobbyist flyer, with a little more flight time and experience. They are equipped with a raft fuse, and the planes are fully assembled for a wing that needs to be attached. The ARF airplane requires a small purchase of radios and possibly a motor.

The RTF airplane has everything a beginner needs to fly, with no purchase required. Then there are plug and play RC airplanes. The PNP, has a motor, and radio pieces without a transmitter. The plane was almost fully developed sans a motor. So, in short the RTF has everything needed to fly, the PNP is partially there, the ARF requires the purchase of radio, motor and batteries.

The best bet for a beginner enthusiast is the RTF micro models. Common airplanes usually have more advanced engines and not for beginners. RTF is usually made of a foam, where regular recreational hobbies are made of metals. When considering what kind of RC airplane to buy; determine the flying level. The new RC airplane hobbyist is perfect for RTF, the intermediate flyer works well with PNP, and ARF and the advanced flyer is perfect for regular RC airplanes models. Remember, to safely measure where the level is and try not to spread it.

Leave a Reply

Your email address will not be published. Required fields are marked *